£5.50 – £492.00 + VAT
Quiet, unblockable & maintenance free
Product Variations
Primo XTRA Standard Pump Only
Primo Xtra Pump Only should be used with a Gannet top access shower tray.
Supplied with 1 x flowswitch
Price: £471.00 +VATPrimo XTRA Link Pump Only
Primo Xtra Pump Only should be used with a Gannet top access shower tray.
No flowswitch supplied (wire directly to the shower)
Price: £463.00 +VATPrimo XTRA Standard Kit A
Primo XTRA pump with Pump Kit ‘A’. UPSW-3-22 should be used with a level access or conventional above ground tray.
– UPSW3-22 is only 30mm in depth and has a 22mm outlet
– Chrome top flange, easy to clean
– Supplied with 1 x flowswitch
Primo XTRA Link Kit A
Primo XTRA pump with Pump Kit ‘A’. UPSW-3-22 should be used with a level access or conventional above ground tray.
UPSW3-22 is only 30mm in depth and has a 22mm outlet
Chrome top flange, easy to clean
No flowswitch supplied (wire directly to the shower)
Primo XTRA Standard Kit B
Primo XTRA pump with Pump Kit ‘B’. USG1-WH should be used with a floor former.
– USG1-WH is only 45mm in depth and has a 22mm outlet
– Manufactured in white ABS, withstands wheelchair loadings
– Supplied with 1 x flowswitch
Primo XTRA Link Kit B
Primo XTRA pump with Pump Kit ‘B’. USG1-WH should be used with a floor former.
– USG1-WH is only 45mm in depth and has a 22mm outlet
– Manufactured in white ABS, withstands wheelchair loadings
– No flowswitch supplied (wire directly into the shower)
Primo XTRA Standard Kit D
Primo XTRA pump with Pump Kit ‘D’. UPSW-4 should be used with our Prinia step in tray, Eagle Two level access tray or a tray with a 90mm diameter waste hole.
– UPSW-4 only 32mm deep and has a 22mm outlet
– Supplied with 1 x flowswitch
Primo XTRA Link Kit D
Primo XTRA pump with Pump Kit ‘D’. UPSW-4 should be used with our Prinia step in tray, Eagle Two level access tray or a tray with a 90mm diameter waste hole.
– UPSW-4 only 32mm deep and has a 22mm outlet
– No flowswitch supplied (wire directly into the shower)
Primo XTRA Flowswitch
A flowswitch is required when you are not wiring the Primo Pump directly to an electric shower. For a mixer shower 2 flowswitches would be required.
Price: £26.00 +VATPrimo XTRA Control Box Cover
Primo Xtra Control Box Cover. (Image to follow).
Optional vacuum formed cover to conceal or protect the control box.
Primo XTRA Flowswitch Cover
Flow Switch Cover. (Image to follow).
Optional vacuum formed cover to conceal or protect the flowswitch
Trade customers are entitled to Trade discount, contact us to find out more.
Please complete this form, and one of our representatives will contact you about our Primo XTRA Pump products.
Error: Contact form not found.
Description
Contour Primo Xtra, the quiet and unblockable shower waste pump, which is maintenance free and requires no servicing, can be used with a variety of different shower tray styles including conventional level access and low level trays, floor formers and step-in, side outlet shower trays.
This silent, recyclable pumping system has been specifically designed to remove waste water from the shower tray or wet floor area, to the waste pipe where there is no direct access to a ground level drain.
Primo Xtra will easily cope with hair, shower gels and small obstructions that would normally cause a blockage.
Designed for the special needs and domestic market to meet the requirements of specifiers, installers and users. Noticeable reduction in sound output virtually eliminates
noise disruption in the bathroom compared to other pumps.
- Fitted with 40mm outlet and inlet. Supplied with 2 connectors to reduce down to 22mm.
- Longer inlet and outlet allows use of John Guest push-fit connectors or similar.
- Significant reduction in noise.
- Self-priming, 24 volt pump.
- For optimum performance use with 22mm pipework or larger.
- Maximum drainage 12 litres per minute.
- Not handed for quick installation.
- Single speed control box, IP65 rated, can be located inside or outside the bathroom.
- No non-return valves required.
- Suitable for electric and mixer showers. Flow switch should be installed within the cold water supply, and can be fitted horizontally or vertically. (Additional flowswitch required)
- Easily adjustable run-on timer.
- 5 year warranty. (*Warranty based upon correct installation and appropriate application)
- Manufactured from parts that are 100% recyclable.
- Complies with BS7671.
- Link directly to a Mira Advance ATL Flex Extra, eliminating need for a flowswitch. (See ‘Link’ options below).
- Easy to install and set up. Comes with complete fitting instructions.
- Each pump is individually water tested.
Primo XTRA Pump Options
Please note that all Standard option Primo Pumps are supplied with a single flowswitch.
Link option Primo Pumps are supplied without a flowswitch as they are designed to be linked directly into the shower.